3315781 - Introduction - REMOVING REFITTING

SYMBOLS

The graphic index and the description of the symbols appearing in the repair procedures are given below.
1 Cutting with hack-sawing machine 2 Cutting with circular saw 3 Cleaning with rotary brush 4 Removing spot welds with spot weld remover 5. Remove spot welds with drill. Drilling for MIG welding 6. Chiselling metal panel. Drilling for MIG welding 7. Application of electro-weldable protection 8 Application of thick electro-weldable protection 9 Centring components 10 Measurement 11. Fixing components 12. Fixing threaded rivets 13. Checking alignment gaps 14. Straightening edges with profiled stake and hammer 15. Removing weld spots with chisel and hammer 16. Removing treatment with pneumatic knife 17. Spot welding 18. MIG welding 19. Welding with oxyacetylene torch 20. Grinding 21. Application of anti-corrosion protection 22. Application of sealants 23. Application of underbody protections 24. Application of paints 25. Application of wax-based protection 26. Application of foam products

PROCESSING SYMBOLS

Cut made by hack saw or pneumatic chisel
Spot welding
Spot welding (three panels)
Continuous - sectional MIG welding
Brazing
MIG fill welding
Sealing