5505A13 SUPPLEMENTARY JUNCTION CONTROL UNIT IN ENGINE BAY - R R - Alfa - 166 - eLearn

3314823 - 5505A13 supplementary junction control unit in engine bay - r r

) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

- 7040D12 engine front side cover (one) lh or rh - r r (left). - 7040D14 engine bay rear side cover (one) lh or rh - r r (left). 1. Undo the nuts (1a) and withdraw the additional junction unit from its seating as far as necessary to disconnect the electrical connections (1b).

For precise identification of the electrical connections, see Wiring Diagrams Section.

1. Remove the additional junction unit.

Refitting ( Removing

) Refit the additional junction unit in its seating.Connect the electrical connections to the additional junction unit.Fix the additional junction unit with its nuts. - 7040D12 engine front side cover (one) lh or rh - r r (left). - 7040D14 engine bay rear side cover (one) lh or rh - r r (left). Connect the negative (-) battery terminal