5520A14 IGNITION KEY BLOCK - R+R - Alfa - 166 - eLearn

3314849 - 5520A14 ignition key block - r+r

It is not possible to order a single lock barrel or to order barrels simply by using a part code.When ordering barrels, observe the special procedure set out in 5580E - Special accessories.

Removing ( Refitting

) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

- 7040A26 steering column trim - r+r . Release the aerial for the electronic key from the ignition lock barrel.1. Insert the ignition key and turn it to the ON position.2. Using a screwdriver, press on the spring clip and remove the ignition lock barrel.

Refitting ( Removing

) Place the ignition lock barrel back in it housing.Remove the ignition key.Position the aerial for the electronic key in the ignition lock barrel.Check the operation of the ignition lock barrel. - 7040A26 steering column trim - r+r . Connect the negative (-) battery terminal.