I01 SIDE LIGHTS/NO. PLATE LIGHTS NOT WORKING - Alfa - 166 - eLearn

3308648 - I01 SIDE LIGHTS/NO. PLATE LIGHTS NOT WORKING

With the ignition on, when the side lights are switched on, the 'lights fault' warning light on the instrument panel comes on for about 15 seconds and then goes out.

0	PRELIMINARY CHECKS	All OK	Problems met	Operation
		Results of the tests
	First check the side light bulbs	Continue to Step 1	Blown bulbs	Replace bulbs
1	CHECKING ELECTRICAL CIRCUIT	All OK	Problems met	Operation
	Switch on the side lights and check that the bulbs light up ( See E2010 SIDE LIGHTS / NO. PLATE LIGHTS )	Continue to Step 2	Wiring broken	Restore connections
		Continue to Step 2	Faulty earth	Repair earth
2	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect diagnostic equipment (Examiner or other instruments) to the diagnostic socket. Verify: that there are no faults in the Electronic Check device the plausibility of all the parameters the correct operation of the system with active diagnosis	Continue to Step 3	Fault detected	Continue following the instructions for the diagnostic equipment
3	HECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Search for the fault starting from another symptom'