2125C22 GEAR LEVER AND MOUNT - R R - Alfa - 166 - eLearn

3314496 - 2125C22 gear lever and mount - r r

) - 7040D12 engine front side cover (one) lh or rh - r r (left). - 7040D14 engine bay rear side cover (one) lh or rh - r r (left). 1. Undo the bolt (1a) and move aside the coolant reservoir (1b).

1. Disconnect the gear selector/engagement cables from the gear selector and engagement assembly.2. Undo the nuts (2a) for the brackets (2b) securing the gear selector/engagement cables.

- 7040L20 tunnel trim - r r . 1. Undo the bolts (1a) and the nuts (1b) and move the support and gearbox manual control lever (1c) backwards, as necessary.2. Remove the circlip (2a) and disconnect the gear selector cable (2b).3. Disconnect the gear engagement cable.4. Remove the safety retainers for the gear selector/engagement cables.5. Remove the gearbox control lever and support.

Refitting ( Removing

) Place the gearbox manual control lever and support in its housing, taking care to insert the gear selector/engagement cables in their housings.Fix the gear selector/engagement cables using the retainers.Connect the gear engagement cable.Connect the gear selector cable and fix it using the circlip.Tighten the nuts and bolt fixing the manual control lever and support.Tighten the nuts for the brackets securing the gear selector/engagement cables.1. Position the spacer tool under the gear engagment lever.

	Name	Country
1	Spacer	1.860.974.000

2. Connect the gear selector cable.

1. Loosen the adjustment nut on the selector lever.Move the gear control lever completely to the right and, in this position, tighten the adjustment nut.

Place the gear control lever in Reverse and remove the spacer tool.

	Name	Country
-	Spacer	1.860.974.000

1. Place the gear control lever in neutral and connect the gear engagement cable.

Refit the coolant reservoir and secure it with its bolt. - 7040L20 tunnel trim - r r . - 7040D14 engine bay rear side cover (one) lh or rh - r r (left). - 7040D12 engine front side cover (one) lh or rh - r r (left).