3314036 - 1008A46 cam shaft left rigid mount - r r (Automatic transmission)

Removing ( Refitting ) Place the vehicle on a ramp. - 4450B10  Front WHEEL (one) - R.R. (left).  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r (right)  - 7055B54  under-engine guard - r r .  - 7040D12  engine front side cover (one) lh or rh - r r (right)  - 7040D14  engine bay rear side cover (one) lh or rh - r r (right)  - 1008C10  power unit upper reaction link r r . 1. Fit a suitable engine lifting bracket.2. Fit the safety tools (2a) and (2b) for supporting the power unit.

NameCountry
2aSupport mountings1.870.650.000

NameCountry
2bCrossmember1.820.581.000
1. Undo the nut fixing the timing side rigid engine support to the flexible mounting.2. Undo the bolts fixing the power unit front flexible mounting to the front suspension frame.
1. Undo the nut fixing the rear power unit rigid support to the flexible mounting.
Raise the power unit using the supporting tools until the power unit front support flexible mounting comes out of the front suspension frame.1. Undo the bolts (1a) and remove the timing side rigid engine support (1b), complete with flexible mounting (1c).
Refitting ( Removing ) 1. Fit the timing side rigid engine support (1a), complete with flexible mounting (1b), and fix it tightening the bolts (1c) to the recommended torque.

FasteningComponentØValue(daNm)
1cBoltENGINE MOUNT TIMING SIDEM10(Engine crankcase side) 6.0 - 7.4
Lower the power unit using the supporting tools until the power unit front support flexible mounting is back in its housing on the front suspension frame.1. Tighten the nut securing the rear power unit rigid support to the flexible mounting to the recommended torque.

FasteningComponentØValue(daNm)
1NutPOWER UNIT RIGID REAR MOUNTM10(Flexible mounting side) 3.8 - 4.7
1. Tighten the bolts fixing the power unit front support flexible mounting to the front suspension frame to the recommended torque.

FasteningComponentØValue(daNm)
1BoltFRONT RUBBER MOUNTSM10(Suspension support frame side) 4.9 - 6.1
2. Tighten the nut securing timing side rigid engine support to the flexible mounting to the recommended torque.

FasteningComponentØValue(daNm)
2NutENGINE MOUNT TIMING SIDEM10(Flexible mounting side) 3.8 - 4.7
Remove the safety tools used for supporting the power unit.

NameCountry
-Support mountings1.870.650.000

NameCountry
-Crossmember1.820.581.000
Remove the engine lifting bracket. - 1008C10  power unit upper reaction link r r .  - 7040D14  engine bay rear side cover (one) lh or rh - r r (right)  - 7040D12  engine front side cover (one) lh or rh - r r (right)  - 7055B54  under-engine guard - r r .  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r (right)  - 4450B10  Front WHEEL (one) - R.R. (left). Remove the car from the ramp.