1016A20 SINGLE CAM COVER - R + R AND REPLACE GASKET - Alfa - 166 - eLearn

3314047 - 1016A20 single cam cover - r + r and replace gasket

) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

- 1016A40 ignition coil cover on cylinder head- r+r . - 5510C14 ignition coil/s - r+r . Release the electrical wiring from the bands on the tappet cover.1. Disconnect the oil vapour recirculation pipes from the tappet cover.2. Undo the bolts (2a) and remove the rocker cover (2b) complete with gasket.

Refitting ( Removing

) Fit the tappet cover, complete with a new seal, and fix it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CAM COVER	M6	(Cylinder head side) 0.8 ÷ 1.0

Connect the oil vapour recirculation pipes to the tappet cover.Fix the electrical wiring to the bands on the tappet cover. - 5510C14 ignition coil/s - r+r . - 1016A40 ignition coil cover on cylinder head- r+r . Connect the negative (-) battery terminal.