3314079 - 1032B52 toothed driven pulley (one) - r + r

Removing ( Refitting ) Place the vehicle on a ramp. - 7040D12  engine front side cover (one) lh or rh - r r (right).  - 7040D14  engine bay rear side cover (one) lh or rh - r r (right).  - 4450B10  Front WHEEL (one) - R.R. (right).  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r (right).  - 7055B54  under-engine guard - r r .  - 1016A40  ignition coil cover on cylinder head- r+r .  - 5510C14  ignition coil/s - r+r .  - 1016A20  single cam cover - r + r and replace gasket .  - 1092G10  single engine belt r r .  - 1092G20  engine component single belt fixed tensioner - one - r + r .  - 1092A12  crankshaft pulley - r+r for versions with air conditioner .  - 1032D12  timing system protective cover(s) - r + r .  - 1092E10  counter-rotating shaft drive toothed belt - r + r .  - 1092E20  counter-rotating shaft drive toothed belts drive pulley - r + r with toothed belt removed .  - 1032B14  toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner . For the inlet side driven pulley, proceed as follows:1. Undo the bolts (1a) for the inlet side driven pulley using the tool (1b) for anti-torque.

NameCountry
1bCounter-torque1.822.155.000
2. Remove the inlet side driven pulley.
For the inlet side driven pulley, proceed as follows:1. Undo the bolt (1a) for the exhaust side driven pulley using the tools (1b) and (1c) for anti-torque.

NameCountry
1bCounter-torque1.822.156.000

NameCountry
1cCounter-torque1.822.146.000
2. Remove the exhaust side driven pulley.
Refitting ( Removing ) For the exhaust side driven pulley, proceed as follows:Fit the exhaust side driven pulley and fix it with the bolt without tightening it.For the inlet side driven pulley, proceed as follows:Fit the inlet side driven pulley and fix it using the bolts without tightening them.  - 1032B14  toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner .  - 1092E20  counter-rotating shaft drive toothed belts drive pulley - r + r with toothed belt removed .  - 1092E10  counter-rotating shaft drive toothed belt - r + r .  - 1032D12  timing system protective cover(s) - r + r .  - 1092A12  crankshaft pulley - r+r for versions with air conditioner .  - 1092G20  engine component single belt fixed tensioner - one - r + r .  - 1092G10  single engine belt r r .  - 1016A20  single cam cover - r + r and replace gasket .  - 5510C14  ignition coil/s - r+r .  - 1016A40  ignition coil cover on cylinder head- r+r .  - 7055B54  under-engine guard - r r .  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r (right).  - 4450B10  Front WHEEL (one) - R.R. (right).  - 7040D14  engine bay rear side cover (one) lh or rh - r r (right).  - 7040D12  engine front side cover (one) lh or rh - r r (right). Remove the vehicle from the ramp.