3314120 - 1056B50 coolant temperature sensor - r + r (Automatic transmission)

Removing ( Refitting ) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

	Name	Connector
-	Battery	A1B

 - 1048A28  vacuum air circuit resonator pipe - r+r1. Disconnect the electrical connection from the engine coolant temperature sensor.

	Name	Connector
1	Engine coolant temperature sensor-sender unit	K36

2. Undo and remove the engine coolant temperature sensor. Refitting ( Removing ) Fit the engine coolant temperature sensor and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	COOLANT TEMP SENSOR	M12	Thermostat side 1.7 - 2.1

Connect the electrical connection to the engine coolant temperature sensor. - 1048A28  vacuum air circuit resonator pipe - r+r . Connect the negative (-) battery terminal.