3314121 - 1056B51 cam angle sensor r + r (Automatic transmission)

Removing ( Refitting ) Position the vehicle on the lift. Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

NameConnector
-Battery  A1B 
 - 7040D12  engine front side cover (one) lh or rh - r r (right)  - 7040D14  engine bay rear side cover (one) lh or rh - r r (right)  - 4450B10  Front WHEEL (one) - R.R. (right)  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r (right)  - 7055B54  under-engine guard - r r .  - 1016A40  ignition coil cover on cylinder head- r+r .  - 5510C14  ignition coil/s - r+r .  - 1016A20  single cam cover - r + r and replace gasket .  - 1092G10  single engine belt r r .  - 1092G20  engine component single belt fixed tensioner - one - r + r .  - 1092A12  crankshaft pulley - r+r for versions with air conditioner .  - 1032D12  timing system protective cover(s) - r + r .  - 1092E10  counter-rotating shaft drive toothed belt - r + r .  - 1092E20  counter-rotating shaft drive toothed belts drive pulley - r + r with toothed belt removed .  - 1032B14  toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner .  - 1032B52  toothed driven pulley (one) - r + r . 1. Undo the bolts (1a) and remove the cam angle sensor (1b).
Refitting ( Removing ) Fit the cam angle sensor and fix it using the bolts. - 1032B52  toothed driven pulley (one) - r + r .  - 1032B14  toothed timing belt - r + r for timing adjustment or replacement versions with air conditioner .  - 1092E20  counter-rotating shaft drive toothed belts drive pulley - r + r with toothed belt removed .  - 1092E10  counter-rotating shaft drive toothed belt - r + r .  - 1032D12  timing system protective cover(s) - r + r .  - 1092A12  crankshaft pulley - r+r for versions with air conditioner .  - 1092G20  engine component single belt fixed tensioner - one - r + r .  - 1092G10  single engine belt r r .  - 1016A20  single cam cover - r + r and replace gasket .  - 5510C14  ignition coil/s - r+r .  - 1016A40  ignition coil cover on cylinder head- r+r .  - 7055B54  under-engine guard - r r .  - 7055B39  front additional wheel arch half (one), lh or rh, front element - r r (right)  - 4450B10  Front WHEEL (one) - R.R. (right)  - 7040D14  engine bay rear side cover (one) lh or rh - r r (right)  - 7040D12  engine front side cover (one) lh or rh - r r (right) Connect the negative (-) battery terminal.Remove the vehicle from the ramp.