1056B60 SINGLE FUEL MANIFOLD PIPE, WITH INJECTORS - R + R - Alfa - 166 - eLearn

3314122 - 1056B60 single fuel manifold pipe, with injectors - r + r

) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

- 1016A40 ignition coil cover on cylinder head- r+r . Discharge the fuel supply pressure (see Group 10 Warnings).1. Disconnect the rapid attachment for the fuel supply pipe.2. Disconnect the electrical connections from the injectors (2a) and the electrical connection from the phase transformer electro-magnet (2b).

	Name	Connector
2a	Injector	N70

	Name	Connector
2b	Timing variator actuator	N76

3. Undo the two bolts (3a) and remove the single fuel manifold pipe (3b) complete with injectors (3c).

Refitting ( Removing

) Fit the single fuel manifold pipe complete with injectors and fit the injectors in their housings applying pressure with both hands.Tighten the two bolts fixing the single fuel manifold pipe.Connect the electrical connections to the injectors.Connect the electrical connection to the phase transformer electro-magnet.Connect the fuel supply pipe to the single fuel manifold pipe. - 1016A40 ignition coil cover on cylinder head- r+r . Connect the negative (-) battery terminal.