3314136 - 1072B10 inlet manifold - r + r and replace seal

Removing ( Refitting )  - 1016A40  ignition coil cover on cylinder head- r+r .  - 1056B60  single fuel manifold pipe, with injectors - r + r .  - 7055B54  under-engine guard - r r .  - 1072D10  modular inlet manifold - r+r .  - 1072D14  sleeves joining long air intake ducts to manifold case - replace with modular manifold removed . Disconnect the earth lead on the inlet manifold.1. Undo the nuts (1a) and remove the inlet manifold (1b) complete with gasket.
Refitting ( Removing ) Fit the inlet manifold, complete with a new gasket, and fix it tightening the nuts to the recommended torque.

FasteningComponentØValue(daNm)
-NutINLET MANIFOLDM8(Cylinder head side) 2.1 - 2.6
Connect the earth lead to the inlet manifold. - 1072D14  sleeves joining long air intake ducts to manifold case - replace with modular manifold removed .  - 1072D10  modular inlet manifold - r+r .  - 7055B54  under-engine guard - r r .  - 1056B60  single fuel manifold pipe, with injectors - r + r .  - 1016A40  ignition coil cover on cylinder head- r+r .