1080B60 LAMBDA SENSOR - R.R. (AUTOMATIC TRANSMISSION) - Alfa - 166 - eLearn

3314161 - 1080B60 LAMBDA SENSOR - R.R. (Automatic transmission)

) Position the vehicle on the lift. Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

1. Disconnect the electrical connection for the Lambda sensor and release the electrical wiring from the bands on the modular inlet manifold.

	Name	Connector
1	Lambda sensor	K40

- 7055B54 under-engine guard - r r . Remove the Lambda sensor protection.1. Undo and remove the Lambda sensor after having release the electrical wiring from the bands.

Refitting ( Removing

) Fit the Lambda sensor in its housing and tighten it to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	LAMBDA PROBE	M18	4.5

Fit the Lambda sensor protection. - 7055B54 under-engine guard - r r . Connect the electrical connection for the Lambda sensor and fix the electrical wiring to the retaining bands on the modular inlet manifold.Connect the negative (-) battery terminal.Remove the vehicle from the ramp.