3314182 - 1084C10 engine oil heat exchanger - r + r

Removing ( Refitting ) Place the vehicle on a ramp. - 7055B54  under-engine guard - r r . Disconnect the lower radiator hose and drain the engine coolant.
Recover the coolant using a suitable container.
1. Remove the cartridge engine oil filter using a suitable tool.
Recover the engine oil which comes out in a suitable container.
2. Loosen the bands and disconnect the engine coolant inlet and outlet pipes from the engine oil heat exchanger.3. Undo the centre pin (3a) and remove the engine oil heat exchanger (3b) from the crankshaft front cover.
Refitting ( Removing ) Fit the engine oil heat exchanger and fix it using the pin.Connect the engine coolant inlet and outlet pipes to the engine oil heat exchanger.Fit the engine oil filter and tighten it fully by hand. - 7055B54  under-engine guard - r r . Top up the engine oil lubrication circuit using the recommended oil.

TypeComponentNameQty.
-OilENGINE LUBRICATION CIRCUITSELENIA 20K-
Supply the engine cooling system with the recommended fluid.

TypeComponentNameQty.
-Fluid [l]ENGINE COOLING CIRCUITAlfa Romeo Climafluid Super Permanent -407.9
Remove the car from the ramp.