3314467 - 1820B30 OPERATING CYLINDER/CLUTCH HYDRAULIC ACTUATOR - R.R.
Removing
(
Refitting
)
- 7040D12 engine front side cover
(one) lh or rh - r r
(left).
- 7040D14 engine bay rear side cover (one) lh or rh - r r
(left).
Drain the brake-clutch fluid from the
reservoir using a suitable syringe. - 1088B12 engine coolant reservoir mount - r r
.
1. Undo the connector and disconnect the rigid pipe from the damper
to the master cylinder on the master cylinder side.2. Remove the circlip (2a) and remove the master cylinder (2b).
Refitting
(
Removing
)
Fit the master cylinder and
secure it with its circlip.Connect the rigid pipe from the damper
to the master cylinder on the master cylinder side and secure it
with its connector, tightened to the specified torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Connector | RIGID PIPE FROM VIBRATION DAMPER | M12 | Operating cylinder side 1.7 - 1.9 |