3314554 - 3310A62 front brake pads - replace with wheels removed

Removing ( Refitting ) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

	Name	Connector
-	Battery	A1B

 - 3330E10  FLEXIBLE PIPE (one), left or right, to front brake calipers - R.R . . 1. Remove the clips securing the brake calipers to the brackets.2. Disconnect the electrical connections on the brake pad wear warning light cables.

	Name	Connector
2	Left brake pad wear sensor (switch)	K20

	Name	Connector
2	Right brake pad wear sensor (switch)	K21

3. Unscrew the bolts (3a) and remove the complete front brake calipers (3b).4. Remove the front brake pads. Refitting ( Removing ) Compress the front brake caliper piston (1a) using the tool (1b) to facilitate the refitting of the bake caliper.

	Name	Country
-	Key	1.820.248.000

Fit the front brake calipers with new brake pads and tighten the bolts to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT BRAKE CALIPER ASSEMBLY	M14	2.5 - 3.0

Connect the electrical connections of the brake pad wear warning light cables.Fit the clips securing the brake calipers to the brackets. - 3330E10  FLEXIBLE PIPE (one), left or right, to front brake calipers - R.R . . Connect the negative (-) battery terminal