3340A13 ABS CENTRAL MOUNT - R R - Alfa - 166 - eLearn

3314592 - 3340A13 abs central mount - r r

) Position the vehicle on the ramp. Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

- 7040D12 engine front side cover (one) lh or rh - r r (left) - 7040D14 engine bay rear side cover (one) lh or rh - r r (left) - 3340A12 A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R. . Remove the protection1. Disconnect the front engine joint and release it from the fixing band.

	Name	Connector
1	Engine front connection	D4

2. Disconnect the electrical connection from the cap and move the electrical wiring aside.

Release the pipes and electrical wiring from the mounting clips on the A.B.S. control unit.1. Undo the bolt securing the air cleaner bracket to the A.B.S. support.

1. Undo the bolts (1a) and nut and remove the A.B.S. support (1b).

Refitting ( Removing

) Fit the A.B.S. control unit support and secure with its nut and bolts.Tighten the bolt securing the air cleaner bracket to the A.B.S. control unit mounting.Secure the pipes and electrical wiring to the clips on the A.B.S. control unit support.Secure the electrical connections to the cap.Connect the front engine joint and secure it to its mounting collar.Refit the protection. - 3340A12 A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R. . - 3330A14 HYDRAULIC BRAKING SYSTEM - Bleed air . - 7040D14 engine bay rear side cover (one) lh or rh - r r (left) - 7040D12 engine front side cover (one) lh or rh - r r (left) Connect the negative (-) battery terminal.Remove the car from the ramps.