3314599 - 3340B55 central brake pipe to lh - r r

Removing ( Refitting ) Position the vehicle on the lift. Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

	Name	Connector
-	Battery	A1B

 - 7040D12  engine front side cover (one) lh or rh - r r (left).  - 7040D14  engine bay rear side cover (one) lh or rh - r r (left).  - 3340A12  A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R. .  - 3340A13  abs central mount - r r .  - 1088B12  engine coolant reservoir mount - r r . 1. Disconnect the wiring connector for the front left wheel speed sensor.

	Name	Connector
1	Left. front wheel sensor for ABS	K70

2. Undo the bolts (2a) and disconnect the earths (2b) and (2c) from the bodywork.

	Name	Connector
2b	Data not available yet	-

	Name	Connector
2c	Data not available yet	-

3. Release the brake pipes from the retaining clip.  - 4450B10  Front WHEEL (one) - R.R. (left).  - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. (left). 1. Disconnect the rigid pipe from hydraulic control unit to front left brake, flexible pipe side. 1. Undo the bolts (1a) and remove the A.B.S. brake pipe mounting bracket (1b).2. Remove the rigid pipe from hydraulic control unit to front left brake. Refitting ( Removing ) Refit in its seating the rigid pipe from hydraulic control unit to front left brake.Fit the A.B.S. brake pipe mounting bracket and secure with its bolts.Connect the rigid pipe from hydraulic control unit to front left brake, flexible pipe side, and tighten the connector to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Connector	HOSE TO FRONT BRAKE CALIPER	M10	Rigid pipe side 1.5 - 1.9

 - 7055B42  Additional FRONT WHEEL ARCH (one), left or right - R.R. (left).  - 4450B10  Front WHEEL (one) - R.R. (left). Secure the brake pipes to their clips.Connect the earths and secure with their bolts to the bodywork.Connect the electrical connection for the front left wheel speed sensor. - 1088B12  engine coolant reservoir mount - r r .  - 3340A13  abs central mount - r r .  - 3340A12  A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R. .  - 3330A14  HYDRAULIC BRAKING SYSTEM - Bleed air .  - 7040D14  engine bay rear side cover (one) lh or rh - r r (left).  - 7040D12  engine front side cover (one) lh or rh - r r (left). Connect the negative (-) battery terminal.Remove the vehicle from the ramp.