3340B62 REAR CONNECTION CENTRAL PIPE - R R - Alfa - 166 - eLearn

3314600 - 3340B62 rear connection central pipe - r r

) Position the vehicle on the ramp. Make sure that the ignition is OFF (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

- 7040D12 engine front side cover (one) lh or rh - r r (left).. - 7040D14 engine bay rear side cover (one) lh or rh - r r (left).. - 3340A12 A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R. . - 3340A13 abs central mount - r r . - 1088B12 engine coolant reservoir mount - r r . 1. Disconnect the wiring connector for the front left wheel speed sensor.

	Name	Connector
1	Left. front wheel sensor for ABS	K70

2. Undo the bolts (2a) and disconnect the earths (2b) and (2c) from the bodywork.3. Release the brake pipes from the retaining clip.

- 4450B10 Front WHEEL (one) - R.R. (left).. - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. (left). - 7055B54 under-engine guard - r r . 1. Undo the bolts (1a) and nut (1b) and remove the brake pipe mounting brackets (1c) from the bodywork.2. Disconnect the rigid pipe from hydraulic control unit to rear brake pipe connection.

1. Undo the bolts (1a) and remove the A.B.S. brake pipe mounting bracket (1b).2. Remove the rigid pipe from hydraulic control unit to rear brake pipe connection.

Refitting ( Removing

) Refit in its seating the rigid pipe from hydraulic control unit to rear brake pipe connection.Fit the A.B.S. brake pipe mounting bracket and secure with its bolts.Connect the rigid pipe from hydraulic control unit to rear brake pipe connection and tighten the connector to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	Connector	RIGID BRAKING PIPE-CONT.UNIT/REAR BRAKES	M10	(Rear brake rigid pipe side) 1.2 - 1.5

Fit the brake pipe mounting bracket to the bodywork and secure with the bolts and nut. - 7055B54 under-engine guard - r r . - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. (left). - 4450B10 Front WHEEL (one) - R.R. (left).. Secure the brake pipes to their clips.Connect the earths and secure with their bolts to the bodywork.Connect the electrical connection for the front left wheel speed sensor. - 1088B12 engine coolant reservoir mount - r r . - 3340A13 abs central mount - r r . - 3340A12 A'B.S. system. - electronic and hydraulic CONTROL UNIT R.R. . - 3330A14 HYDRAULIC BRAKING SYSTEM - Bleed air . - 7040D14 engine bay rear side cover (one) lh or rh - r r (left).. - 7040D12 engine front side cover (one) lh or rh - r r (left).. Connect the battery terminal (-).Remove the car from the ramp.