4410A80 DAMPER LOWER FORK - R R - Alfa - 166 - eLearn

3314666 - 4410A80 damper lower fork - r r

) Position the vehicle on the ramp. - 4450B10 Front WHEEL (one) - R.R. . 1. Remove the spring and release the front brake caliper flexible pipe from the mounting bracket.2. Undo the bolt fixing the front shock absorber fork to the track control arm, track control arm side.

1. Undo the bolt (1a) and disconnect the front wheel rpm sensor (1b).2. Release the electrical wiring for the front wheel rpm sensor from the bracket.3. Undo the bolt (3a) and remove the front wheel rpm sensor cable mounting bracket (3b).4. Undo the bolt fixing the front shock absorber fork to the track control arm, shock absorber stem side.5. Recover the front brake caliper flexible pipe mounting bracket.

Release the front shock absorber fork with the track control arm from the shock absorber stem using a plastic hammer.Position a hydraulic jack under the hub steering knuckle.1. Undo the nut (1a) and disconnect the upper track control arm (1b) from the front hub steering knuckle using tool (1c).

	Name	Country
1c	Extractor	1.821.169.000

1. Lower the hydraulic jack and remove the front shock absorber fork with track control arm.

Refitting ( Removing

) Replace the front shock absorber fork with track control arm in its housing.Raise the hydraulic jack.Connect the upper track control arm to the front hub steering knuckle and fix it tightening the nut to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	FRONT SUSPENSION TOP LEVER	M10	Front hub steering knuckle side 4.3 - 4.7

Remove the hydraulic jack from under the hub steering knuckle.Connect the front shock absorber fork with track control arm to the shock absorber stem.1. Fit the front brake caliper flexible pipe mounting bracket (1a) and tighten the bolt (1b) fixing the front shock absorber fork with lower track control arm, shock absorber stem side.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	FRONT DAMPER FORK ON WISHBONE	M12	Shock absorber side 11.7 - 12.9

2. Fit the front wheel rpm sensor cable mounting bracket (2a) and fix it using the bolt (2b).3. Fix the front wheel rpm sensor electrical wiring to the bracket.4. Replace the front wheel rpm sensor (4a) in its housing and fix it using the bolt (4b).

1. Tighten the bolt fixing the front shock absorber fork to the track control arm, track control arm side to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1	Bolt	FRONT DAMPER FORK ON WISHBONE	M12	Lower track control arm side 8.6 - 9.5

2. Position the front brake caliper flexible pipe on the mounting bracket and fix it using the spring.

- 4450B10 Front WHEEL (one) - R.R. . Remove the car from the ramp. Check and if necessary adjust the wheel geometry values - 4450A10 front wheel geometry - check using optical equipment - includes front wheel tow-in adjustment if necessary .