4420C80 LEFT SUSPENSION LINK (1), LH OR RH - Alfa - 166 - eLearn

3314693 - 4420C80 left suspension link (1), lh or rh

) Position the vehicle on the ramp. - 4450B11 WHEEL (one) rear - R.R. . 1. Undo the upper bolt fixing the strut to the hub.2. Loosen the lower bolt fixing the strut to the hub.

1. Position a hydraulic jack under the rear suspension crossmember.2. Undo the bolts (2a) and lower the rear suspension crossmember (2b), as necessary, using the hydraulic jack

1. Loosen the bolt fixing the camber rod to the mounting bracket.2. Undo the bolts (2a) and remove the camber rod (2b) complete with bracket (2c).

Refitting ( Removing

) 1. Fit the camber rod (1a), complete with bracket (1b) and fix it tightening the bolts (1c) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1c	Bolt	HOUSING LINK	M12	Rear suspension crossmember side 8.4 - 9.2

2. Tighten the bolt fixing the camber rod to the bracket.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	HOUSING LINK	M12	Bracket side 8.4 - 9.2

1. Replace the rear suspension crossmember (1a) in its housing using the hydraulic jack (1b) and fix it tightening the bolts (1c) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1c	Bolt	REAR CROSS-BEAM	M10	Bodyshell side 4.7 - 5.1

Remove the hydraulic jack from under the crossmember.

1. Tighten the bolts (1a) and (1b) fixing the camber rod to the hub strut to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1a	Bolt	REAR PILLAR-WISHBONE CUPPING LINKS	M14	Steering knuckle side 15.9 - 17.5

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	REAR PILLAR-WISHBONE CUPPING LINKS	M12	Steering knuckle side 11.7 - 12.9

- 4450B11 WHEEL (one) rear - R.R. . Remove the car from the ramp. Check and if necessary adjust the wheel geometry values - 4450A40 rear wheel geometry - check using optical equipment .