3314709 - 4450C10 front pillar (one), l/h or r/h complete with wheel hub - r+r with wheel removed - check wheel geometry separately

Removing ( Refitting )  - 4450B10  Front WHEEL (one) - R.R. .  - 3310A57  front brake calliper bracket - r r .  - 3310A48  front brake disc - r r . 1. Remove the bevel and undo the nut fixing the driveshaft to the wheel hub.2. Undo the bolt (2a) and remove the front wheel rpm sensor (2b) from the steering knuckle.3. Undo the bolt fixing the front shock absorber fork to the lower track control arm.4. Undo the nut (4a) and disconnect the lower track control arm from the front steering knuckle using the tool (4b).

	Name	Country
4b	Extractor	1.821.169.000

1. Undo the nut (1a) and disconnect the power steering box rod from the front steering knuckle using the tool (1b).

	Name	Country
1b	Extractor	1.821.169.000

1. Undo the nut (1a) and disconnect the upper track control arm from the front steering knuckle using the tool (1b).

	Name	Country
1b	Extractor	1.821.169.000

1. Remove the front steering knuckle complete with wheel hub. Refitting ( Removing ) Replace the front steering knuckle, complete with wheel hub, in its housing.Connect the upper track control arm to the front steering knuckle and fix it by tightening the nut to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	FRONT SUSPENSION TOP LEVER	M10	Front hub steering knuckle side 4.3 - 4.7

Connect the power steering box rod to the front steering knuckle and fix it by tightening the nut to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	ADJUSTABLE STEERING LINKS	M10	(Front wheel hub steering knuckle side) 4.3 ÷ 4.7

Connect the lower track control arm to the front steering knuckle and fix it by tightening the nut to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Nut	FRONT SUSPENSION LOWER LEVER	M14	Front wheel hub steering knuckle side 8.6 - 9.5

Tighten the bolt fixing the front shock absorber fork to the lower track control arm to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT DAMPER FORK ON WISHBONE	M12	Lower track control arm side 8.6 - 9.5

Fit the front wheel rpm sensor on the steering knuckle and fix it using the bolt.1. Tighten the nut (1a) for the driveshaft to the wheel hub to the recommended torque using the tool (1b) for angular tightening.

	Fastening	Component	Ø	Value(daNm)
1a	Nut	FRONT DRIVE SHAFT COMPLETE WITH JOINTS	M24	Hug steering knuckle side 6.7 - 7.3 + 50°

	Name	Country
1b	Protractor	1.820.622.000

Check that the maximum torque during angular tightening is between 26 and 45 daNm.

 - 3310A48  front brake disc - r r .  - 3310A57  front brake calliper bracket - r r .  - 4450B10  Front WHEEL (one) - R.R. .