5010B21 CLIMATE CONTROL UNIT COMPARTMENT - R R - Alfa - 166 - eLearn

3314726 - 5010B21 climate control unit compartment - r r

) - 5050B34 windscreen wiper arm/s complete with blade - r+r . - 7055A18 Windscreen base TRIM - R.R. . Release the fuel pipes from the band on the climate control unit housing partition.Release the electric cables from the bands on the climate control unit housing partition.1. Remove the two buttons (1a) fixing the climate control unit housing partition using the tool (1b).

	Name	Country
1b	Scraper blade	1.823.015.000

2. Undo the nuts (2a) and move the relay holder bracket (2b) aside.According to the version involved, release the pipes, electric cables or other components from the climate control unit housing partition.

1. Remove the cover (1a), undo the nuts (1b) and disconnect the electrical connections (1c) and the alternator and starter motor supplies (1d) from the junction unit.

	Name	Connector
1c	Data not available yet	-

	Name	Connector
1d	Data not available yet	-

2. Undo the nut (2a) and remove the junction unit (2b).

1. Undo the bolt (1a) and move aside the coolant reservoir (1b).2. Undo the bolts (2a) for the engine coolant reservoir and power assisted fluid reservoir mounting bracket (2b) and move them aside.

1. Remove the buttons (1a) for the climate control unit housing partition using the tool (1b).

	Name	Country
1b	Scraper blade	1.823.015.000

Undo the bolts and the nut for the fairlead in the partition for the pipe, then move it away.2. Remove the climate control unit housing partition.

Refitting ( Removing

) Place the climate control unit housing partition back in its housing afterhaving fixed the fuel pipes and the electric cables to the bands.Fix the climate control unit housing partition using the buttons.Place the fairlead for the pipes in its housing and fix it to the partition using the bolts and the nut.Place the power assisted steering fluid reservoir and the engine coolant reservoir back in their housings, then fix the mounting bracket using the bolt.Fix the engine coolant reservoir using the bolt.Place the junction unit back in its housing and fix it using the nut.Connect the electrical supply connections for the starter motor and alternator to the junction unit and fix them using the nuts.Fit the junction unit cover.According to the version involved, fix the pipes, electric cables or other components to the climate control unit housing partition.Place the relay holder bracket back in its housing and fix it using the nuts. - 7055A18 Windscreen base TRIM - R.R. . - 5050B34 windscreen wiper arm/s complete with blade - r+r .