3314770 - 5040A26 compressor mount - r r

Removing ( Refitting ) Position the vehicle on the ramp. Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

NameConnector
-Battery  A1B 
 - 7040D12  engine front side cover (one) lh or rh - r r (right).  - 7040D14  engine bay rear side cover (one) lh or rh - r r (right).  - 1092G10  single engine belt r r .  - 5040A10  Air conditioning refrigerant CIRCUIT - Draining and Refilling .  - 5040A44  air conditioner dehydrating filter/accumulator - r+r .  - 5040A20  air conditioner compressor - r+r - includes fluid level check and top up if necessary . 1. Undo the bolts (1a) and remove the air conditioning compressor support (1b).
Refitting ( Removing ) Fit the air conditioning compressor support and fix it tightening the bolts to the recommended torque.

FasteningComponentØValue(daNm)
-BoltCOMPRESSOR MOUNT (AC)M10Engine crankcase side 4.3 - 5.3
 - 5040A20  air conditioner compressor - r+r - includes fluid level check and top up if necessary .  - 5040A44  air conditioner dehydrating filter/accumulator - r+r .  - 5040A10  Air conditioning refrigerant CIRCUIT - Draining and Refilling .  - 1092G10  single engine belt r r .  - 7040D14  engine bay rear side cover (one) lh or rh - r r (right).  - 7040D12  engine front side cover (one) lh or rh - r r (right). Connect the negative (-) battery terminalRemove the car from the ramps.