3314810 - 5050B34 windscreen wiper arm/s complete with blade - r+r
Removing
(
Refitting
)
1. Remove the protective caps.2. Undo the nuts fixing the wiper arms.3. Disconnect the left auxiliary arm lever (for the left wiper arm
only) and remove the wiper arms, releasing them from the bearing
together with the washers.
Refitting
(
Removing
)
Place the windscreen wiper
motor in the rest position.Connect the left auxiliary arm lever (for
the left wiper arm only), then position the windscreen wiper arms
in a horizontal position and fix them using the nuts without tightening
them.Check that the wiper arms are working properly.Tighten the nuts fixing the wiper arms
to the recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Nut | WINDSCREEN WIPER ARM/S | M10 | 1.5 |