3314839 - 5510C34 rpm and timing sensor (single) - r+r

Removing ( Refitting ) Position the vehicle on the lift. Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

NameConnector
-Battery  A1B 
1. Disconnect the electrical connection for the rpm and timing sensor.

NameConnector
1Rpm sensor  K46 
 - 7055B54  under-engine guard - r r . 1. Undo the bolt (1a) and remove the engine rpm and timing sensor (1b).
Refitting ( Removing ) Fit the engine rpm and timing sensor and fix it using the bolt to the cylinder block/crankcase. - 7055B54  under-engine guard - r r . Connect the electrical connection for the engine rpm and timing sensor.Connect the negative (-) battery terminal.Remove the vehicle from the ramp.