3314840 - 5510C42 knock sensor - r+r

Removing ( Refitting ) Position the vehicle on the lift. Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

NameConnector
-Battery  A1B 
 - 7055B54  under-engine guard - r r .  - 1076B50  exhaust pipe attachment to engine - r + r . 1. Disconnect the electrical connection for the knock sensor.

NameConnector
1Detonation sensor  K50 
2. Undo the bolt (2a) and remove the knock sensor (2b).
Refitting ( Removing ) Fit the knock sensor and fix it tightening the bolt to the recommended torque.

FasteningComponentØValue(daNm)
-BoltKNOCK SENSORM8Crankcase side 1.95 - 2.05
Connect the electrical connection for the knock sensor. - 1076B50  exhaust pipe attachment to engine - r + r .  - 7055B54  under-engine guard - r r . Connect the negative (-) battery terminal.Remove the vehicle from the ramp.