5520B12 STARTER MOTOR - R+R FOR VERSIONS WITH A/C - Alfa - 166 - eLearn

3314852 - 5520B12 starter motor - r+r for versions with a/c

) Position the vehicle on the lift. Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

- 7055B54 under-engine guard - r r . - 1076B50 exhaust pipe attachment to engine - r + r . 1. Undo the bolts (1a) for the starter motor, release the band (1b) and remove the electrical connections protective cover (1c).

1. Disconnect the electrical connections and remove the starter motor.

Refitting ( Removing

) Fit the starter motor and fix it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	STARTER MOTOR	M8	Gearbox side 2.3 - 2.8

Connect the electrical connections to the starter motor and fix the wiring using the band.Close the protective cover for the electrical connections. - 1076B50 exhaust pipe attachment to engine - r + r . - 7055B54 under-engine guard - r r . Connect the negative (-) battery terminal.Remove the vehicle from the ramp.