5540C24 MOTOR (ONE) FOR L/H OR R/H HEADLAMP/LIGHT CLUSTER ALIGNMENT CORRECTION - R+R - Alfa - 166 - eLearn

3314889 - 5540C24 motor (one) for l/h or r/h headlamp/light cluster alignment correction - r+r

) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

1. Disconnect the electrical connection from the headlamp alignment adjustment motor.

	Name	Connector
1	Left headlamp alignment corrector motor	N30

	Name	Connector
1	Right headlamp alignment corrector motor	N31

2. For the left light cluster alignment motor only, open the spring (2a) and remove the main beam headlamp bulb protective cover (2b).3. Rotate the light cluster alignment motor in a clockwise direction and remove it.

Refitting ( Removing

) Place the light cluster alignment motor in its housing, check that the pin is correctly attached to the parabola, then rotate the motor in an anti-clockwise direction to secure it.For the left light cluster alignment motor, fit the main beam headlamp bulb protective cover and fix it using the spring.Connect the negative (-) terminal to the battery.