3315054 - 7010B14 rear side door catch striker r r

Removing ( Refitting ) 1. Unscrew both bolts retaining the striker to the door.2. Remove the striker together with any underlying shims. Refitting ( Removing ) Check that the striker is undamaged.Fit the striker.1. Screw in both retaining bolts without tightening to torque.2. Use the bolt slots to move the striker into the correct position.Fit new shims or refit old shims if necessary in order to adjust the striker accurately.Permitted adjustment movements are indicated by arrows. Tighten the retaining bolts.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	REAR DOOR LOCK STRIKER	M8	2.4

Check the striker and catch fit together properly and ensure the door is aligned when closed.