3315261 - 7045J49 reduction mechanism for front seat cushion rear lift motor, lh or rh r r

Removing ( Refitting ) - 7045A10 l/h or r/h front seat (one) - r+r  - 7045M10  front seat heating system switch - r+r- 7045A43 seat exterior guard - r r 1. Cut collar (1a) and disconnect lift motor electrical connection (1b).2. Unscrew fastenings (2a) securing the drive gear unit to the guide and the guide to the seat frame. Recover washer (2b).3. Take off the retaining ring on the vertical slide pin.4. Remove guide/plate assembly (4a) by taking shaft (4b) out of its fitting on the plate and remove motor/drive gear unit (4c). Position the motor/drive gear unit on a work bench.1. Unscrew the bolts. 2. Remove the motor from the drive gear unit. Refitting ( Removing ) Position the motor and refit the guide and plate by connecting them together as a unit.Tighten the fasteners securing the drive gear unit to the guide and the guide to the seat frame.Secure the retaining ring to the vertical slide pin.Fit the new collar and connect the lift motor electrical connection.Check the unit is working properly at the bench using an appropriate electrical supply system.- 7045A43 seat exterior guard - r r  - 7045M10  front seat heating system switch - r+r- 7045A10 l/h or r/h front seat (one) - r+r