3315308 - 7065A12 front seat belt (one), lh or rh, with pretensioner on wheel - r r
WARNING: before removing
and refitting pretensioners the following operations must be carried
out:
- Turn the key to STOP and remove.
- Disconnect the battery leads and insulate.
- Wait for 10 minutes before continuing.
- OBSERVE ALL SPECIFIED SAFETY RULES (see 7065A - Precautions)
Removing
(
Refitting
)
- 7040H36 central trim lower element
- r r - 7040H38 central pillar upper element - r r - 7040H34 central pillar trim - r r1. Unscrew the upper nut retaining the seat belt height adjustment
device.2. Unscrew bolts (2a) retaining the bracket (2b).3. Disconnect the pretensioner device electrical connection.
| Name | Connector |
|---|
| 3 | Driver's seat belt pre-tensioner | Q20 |
| Name | Connector |
|---|
| 3 | Front passenger seat belt pre-tensioner | Q21 |
4. Unscrew the reel retaining bolt.5. Remove the seat belt with the pretensioner.Replace the pretensioner in the special
cabinet. Place it carefully on a free surface.
Refitting
(
Removing
)
1. Refit the pretensioner. | Handle the pretensioner with extreme care.Ensure
the battery is disconnected. |
2. Tighten the bolt to the specified torque.
| Fastening | Component | Ø | Value(daNm) |
|---|
| 2 | Bolt | FRONT SEAT BELT REEL.. | 7/16" | 4 |
3. Fit the seat belt gear unit (3a) and tighten nut (3b) to the
specified torque.4. Connect the electrical connection.5. Fit retaining bracket (5a) and tighten both retaining bolts (5b).
Check the belt slides freely. - 7040H34 central pillar trim - r r - 7040H38 central pillar upper element - r r - 7040H36 central trim lower element - r r
