1036C14 CAMSHAFT IN CYLINDER HEAD - R R WITH HEAD REMOVED - Alfa - 166 - eLearn

3315365 - 1036C14 camshaft in cylinder head - r r with head removed

) 1. Position the tool in the vice.

	Name	Country
1	Mount	1.820.012.000

2. Fit the tool.

	Name	Country
2	Mount	1.820.258.000

3. Fit the tool.

	Name	Country
3	Spacer	1.820.267.000

4. Position the cylinder head (4a) on the supporting tools and fix it using the nuts (4b).

1. Undo the bolt (1a) of the exhaust side camshaft pulley, using the tools (1b) for counter-torque.

	Name	Country
1b	Counter-torque	1.822.146.000

	Name	Country
1b	Counter-torque	1.822.156.000

2. Remove the exhaust side camshaft pulley.3. Undo the bolts (3a) on the inlet side camshaft pulley, using the tool (3b) for counter-torque.

	Name	Country
3b	Counter-torque	1.822.155.000

4. Remove the inlet side camshaft pulley.5. Undo the bolt securing the cam angle sensor to the camshaft front cap.

1. Undo the bolts (1a) and remove the camshaft caps (1b).

Lay them out in the correct order for reassembly.

2. Remove the upper bearing shell for the front camshaft support, inlet side.3. Remove the camshafts.4. Remove the front camshaft oil seals.5. Remove the lower bearing shell for the front camshaft support, inlet side.

Refitting ( Removing

) Fit the lower bearing shell for the front camshaft support, inlet side.Fit the camshafts.Fit the upper bearing shell for the front camshaft support, inlet side.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CAMSHAFT CAPS	M7	1.3 - 1.6

1. Fit the front camshaft oil seal, exhaust side (1a) using the tool (1b).

	Name	Country
1b	Fitting tool	1.821.228.000

1. Fit the front camshaft oil seal, inlet side (1a) using the tool (1b).

	Name	Country
1b	Fitting tool	1.821.252.000

1. Fit the inlet side camshaft pulley.2. Tighten the bolts (2a) of the inlet side camshaft pulley, using the tool (2b) for counter-torque.

	Name	Country
2b	Counter-torque	1.822.155.000

3. Fit the exhaust side camshaft pulley.4. Tighten the bolt (4a) on the exhaust side camshaft pulley to torque, using the tools (4b) for counter-torque.

	Fastening	Component	Ø	Value(daNm)
4a	Bolt	TIMING GEAR DRIVEN PULLEYS	M12	10.0 - 12.4

	Name	Country
4b	Counter-torque	1.822.146.000

	Name	Country
4b	Counter-torque	1.822.156.000

5. Tighten the bolt securing the cam angle sensor to the camshaft front cap.

Remove the cylinder head from the supporting tools.Remove the cylinder head support tools from the vice and return them.