3315617 - E3040 CENTRAL LOCKING - Functional description
Functional description
The control unit
M40 manages the operation
of the central door locking system.
The control unit is supplied directly by
the battery.
See E3050 ELECTRIC FRONT WINDOWS
The control unit
M40 receives the commands
to lock (pin 16 of connector B) or unlock (pin 15 of connector B)
the frotn doors, coming from the switches (handles) in the front locks
N50 and N51, or the remote control receiver M35 at pins 12 and 13
of connector A (for this component
See
E7015
ALARM
: it is the
same commands that light up the 'doors open' LEDs in the instrument
panel and which control the timing of certain lights
See
E2510
COURTESY LIGHTS
.
The control unit also receives signals on
the state of the locks for the rear doors, coming from geared motors
N55 and N56, at pins 15 and 16 of connector B, respectively.
these are the same signal which light up the 'doors open' LEDs in
the instrument panel and which control the timed operation of some
lights
See E2510 COURTESY LIGHTS
.
The control unit
M40 commands the locks
on the basis of the logic illustrated previously:
the lock/unlock
signals for the motors of the front doors (
N50 and N51) and rear
doors (N55 and N56).
Control unit
M40 riceives signals from
the switch on tunnel control unit H36 to lock/release the doors
from the inside at pins 14 and 17 (connector B)