3315771 - E8010 DIAGNOSTIC MULTIPLE CONNECTOR - Functional description
Functional description
The tester connection R10 is supplied, at pin 16, directly by the battery (maxifuse CENTR of B5 ), via fuse F17 of junction unit B1 . Pins 4 and 5 are earthed. Pin 1 is connected to the ABS control unit M50, pin 11, ( See E7020 ABS ). Pin 3 is connected to Air Bag control unit M60, pin 9, for system with side bags, pin 3 for the basic system ( See E7030 AIRBAG ). Pin 11 is connected to alarm control unit M30 - pin 6 of connector A - and remote control receiver M35 - pin 2, ( See E7015 ALARM ). Pin 8 is connected to Code control unit M20, pin 5, ( See E7010 CODE ).Functional description
Pin 7 is connected to engine management control unit M10 via a dedicated line.Pin 9 is connected via a single line to numerous control units and electronic devices:
- to instrument panel E50 : pin 1 of connector C ( See E4010 INSTRUMENT PANEL);
- to electronic Check device M45 : pin 11 of connector C;
- to ICS Display E60 - pin 1 of connector B: this collects - in a single test channel - diagnostic information on display E60, and also information on control unit M70 - pin 13 of connector C ( See E6020 AIR CONDITIONING ) and navigator control unit M90;
- to xenon headlamps control unit M87 : pin 11.