3315773 - Introduction - ENGINE (Automatic transmission)
IMPORTANT
All the operations must be carried out with the utmost attention and care to avoid personal injury.The engine compartment contains many moving parts, components at high temperature and live electrical cables.Closely observe the following precautions when carrying out operations in the engine compartment:
- Turn off the engine and wait for it to cool down.
- Do not smoke.
- Do not use naked flames.
- Make sure that there is an extinguisher at hand.
WARNINGS
All the operations must be carried out with the utmost attention and care to avoid damaging the components.Before any interventions on electrical components, including battery disconnection, make sure that the ignition is off ("STOP" position).Before any interventions on components of the fuel system, discharge the pressure in the system using tool N. 1.870.684.000 connected to the specific valve located on the fuel distribution manifold.To release parts which are firmly stuck together, tap lightly using an aluminium or lead hammer for ferrous materials, or a wood or resin hammer for light alloy parts.During dismantling, check that parts which have to be marked carry the reference marks.During refitting, lubricate the parts as necessary to prevent seizures during the initial period of operation.During refitting, it is essential to observe the tightening torques and adjustment data.During refitting operations, replace gaskets, oil seals, spring washers, safety plates, self-locking nuts and any worn parts.IMPORTANT
IMPORTANT
All the operations must be carried out with the utmost attention and care to avoid personal injury.The engine compartment contains many moving parts, components at high temperature and live electrical cables.Closely observe the following precautions when carrying out operations in the engine compartment:
- Turn off the engine and wait for it to cool down.
- Do not smoke.
- Do not use naked flames.
- Make sure that there is an extinguisher at hand.
WARNINGS
IMPORTANT
IMPORTANT
All the operations must be carried out with the utmost attention and care to avoid personal injury.The engine compartment contains many moving parts, components at high temperature and live electrical cables.Closely observe the following precautions when carrying out operations in the engine compartment:
- Turn off the engine and wait for it to cool down.
- Do not smoke.
- Do not use naked flames.
- Make sure that there is an extinguisher at hand.
WARNINGS
All the operations must be carried out with the utmost attention and care to avoid damaging the components.Before any interventions on electrical components, including battery disconnection, make sure that the ignition is off ("STOP" position).To release parts which are firmly stuck together, tap lightly using an aluminium or lead hammer for ferrous materials, or a wood or resin hammer for light alloy parts.During dismantling, check that parts which have to be marked carry the reference marks.During refitting, lubricate the parts, as necessary, to prevent seizing during the initial period of operation.During refitting, it is essential to observe the tightening torques and adjustment data.During refitting operations, replace gaskets, oil seals, spring washers, safety plates, self-locking nuts and any worn parts.IMPORTANT
All the operations must be carried out with the utmost attention and care to avoid personal injury.The engine compartment contains many moving parts, components at high temperature and live electrical cables.Closely observe the following precautions when carrying out operations in the engine compartment:
- Turn off the engine and wait for it to cool down.
- Do not smoke.
- Do not use naked flames.
- Make sure that there is an extinguisher at hand.
WARNINGS
All the operations must be carried out with the utmost attention and care to avoid damaging the components.Before any interventions on electrical components, including battery disconnection, make sure that the ignition is off ("STOP" position).Before any interventions on components of the fuel system, discharge the pressure in the system using tool N. 1.870.684.000 connected to the specific valve located on the fuel distribution manifold.To release parts which are firmly stuck together, tap lightly using an aluminium or lead hammer for ferrous materials, or a wood or resin hammer for light alloy parts.During dismantling, check that parts which have to be marked carry the reference marks.During refitting, lubricate the parts as necessary to prevent seizures during the initial period of operation.During refitting, it is essential to observe the tightening torques and adjustment data.During refitting operations, replace gaskets, oil seals, spring washers, safety plates, self-locking nuts and any worn parts.IMPORTANT
IMPORTANT
All the operations must be carried out with the utmost attention and care to avoid personal injury.The engine compartment contains many moving parts, components at high temperature and live electrical cables.Closely observe the following precautions when carrying out operations in the engine compartment:
- Turn off the engine and wait for it to cool down.
- Do not smoke.
- Do not use naked flames.
- Make sure that there is an extinguisher at hand.
WARNINGS
IMPORTANT
IMPORTANT
All the operations must be carried out with the utmost attention and care to avoid personal injury.The engine compartment contains many moving parts, components at high temperature and live electrical cables.Closely observe the following precautions when carrying out operations in the engine compartment:
- Turn off the engine and wait for it to cool down.
- Do not smoke.
- Do not use naked flames.
- Make sure that there is an extinguisher at hand.