3314083 - 1032C31 fixed timing tensioner - r r
Removing
(
Refitting
)
Position the vehicle on the ramp. - 7040D12 engine front side cover (one) lh or rh - r r
(left).
- 7040D14 engine bay rear side cover (one) lh or rh - r r
(left).
- 4450B10 Front WHEEL (one) - R.R.
(left).
- 7055B39 front additional wheel arch half (one), lh or rh,
front element - r r
(right)
- 7055B54 under-engine guard - r r
.
- 1016A40 ignition coil cover on cylinder head- r+r
.
- 5510C14 ignition coil/s - r+r
.
- 1016A20 single cam cover - r + r and replace gasket
.
- 1092G10 single engine belt r r
.
- 1092G20 engine component single belt fixed tensioner - one
- r + r
.
- 1092A12 crankshaft pulley - r+r for versions with air conditioner
.
- 1032D12 timing system protective cover(s) - r + r
.
- 1092E10 counter-rotating shaft drive toothed belt - r + r
.
- 1092E20 counter-rotating shaft drive toothed belts drive
pulley - r + r with toothed belt removed
.
- 1032B14 toothed timing belt - r + r for timing adjustment
or replacement versions with air conditioner
.
1. Undo the bolt (1a) and remove the fixed timing belt tensioner
(1b).
Refitting
(
Removing
)
Fit the fixed timing belt tensioner and
fix it tightening the bolt to the recommended torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | Bolt | FIXED TENSIONER | M8 | (Engine crankcase side) 2.7 - 3.4 |