3313988 - 0010K40 40,000km service coupon, emission control versions
Position the vehicle
on the ramp.Check that the tyre treads are not unevenly
worn. | Some types of tyres are fitted
with wear indicators; they have to be replaced as soon as these indicators
become visible. |
 | Do not cross-interchange the tyres. |
Check that the tyre pressures are correct,
including the spare tyre. | The tyre pressures should be checked
on cold tyres. |
Earth the front brake pad wear indicator
cable.Turn the ignition on (MAR).Press the brake pedal and check that the
front brake pad wear warning light comes on. Visually check the state of wear of the
rear brake pads.Raise the vehicle and check that the rubber
gaiters on the drive shafts and power steering and the balljoint caps
are not friction damaged or broken.Check that there are no leaks from the
brake and fuel pipes/connectors. Visually check
- bodywork exterior
- underside protection (exhaust, fuel and brake pipes)
- rubber components (dust excluders, hoses, bushes, etc.).
Carry out Op.
3380A04 handbrake - check travel
.
Carry out Op.
1080A12 idling co level - check using special equipment and
adjust speed
.
Carry out Op.
1048A14 air cleaner filtering element - replace.
.
Check and if necessary top up the
following fluid levels:
- brake and clutch,
- power steering,
- windscreen wiper,
- battery,
- engine coolant
- etc.
Connect the EXAMINER or other
diagnostic instruments to the diagnostic socket (select the control
unit in question). Check the plausibility of all the parameters
and if necessary carry out the available active diagnoses.
Carry out Op.
0010T12 engine oil and filter replace
.
Carry out Op.
5010B09 purifying filter (antipollen) filter element - replace
.