3314929 - 5580C12 clock spring for air bag module on steering wheel r r

Removing ( Refitting ) Place the steering wheel in the centred position with the wheels straight. - 5580C18  air bag module - r+r .

Closely observe the safety regulations established for this operation.

 - 7040A26  steering column trim - r+r - 4110A11  steering wheel - r+r for replacement or check for versions with air bag . 1. Disconnect the electrical connection for the horn.

	Name	Connector
1	High-tone horn	P10

2. Remove the protection, slipping it out of its housing.3. Undo the bolts (3a) and remove the clock spring for the Air Bag system (3b).

The clock spring is fitted with a device which automatically stops its rotation when it is removed from the steering wheel. Avoid forcing its rotation.

Refitting ( Removing ) Check that the wheels are straight as the parts available as spares are designed to be fitted in this condition.

If, for any reason, the upper plate for the clock spring should rotate in relation to the lower one in such a way that the relative position is no longer known, then the clock spring must be replaced.

Place the clock spring for the Air Bag system back in its housing and fix it using the bolts.

If a new clock spring is being fitted, remove the safety tab.

Fit the protection in the housing.Connect the electrical connection for the horn. - 4110A11  steering wheel - r+r for replacement or check for versions with air bag .  - 7040A26  steering column trim - r+r - 5580C18  air bag module - r+r . Test the operation of the horns.Check the operation of the Air Bag system using the Examiner or other diagnostic equipment.