1092E10 COUNTER-ROTATING SHAFT DRIVE TOOTHED BELT - R + R - Alfa - 166 - eLearn

3314203 - 1092E10 counter-rotating shaft drive toothed belt - r + r

) Place the vehicle on a ramp. - 7040D12 engine front side cover (one) lh or rh - r r (right). - 7040D14 engine bay rear side cover (one) lh or rh - r r (right). - 4450B10 Front WHEEL (one) - R.R. (right). - 7055B39 front additional wheel arch half (one), lh or rh, front element - r r (right). - 7055B54 under-engine guard - r r . - 1092G10 single engine belt r r - 1092A12 crankshaft pulley - r+r for versions with air conditioner . - 1092G20 engine component single belt fixed tensioner - one - r + r . - 1032D12 timing system protective cover(s) - r + r . 1. Undo the nut for the counter-balance shaft drive belt moving tensioner.2. Remove the counter-balance shaft drive belt.

Refitting ( Removing

) 1. Rotate the counter-balance shafts so that the references on the pullies are aligned with the references on the front covers.2. Temporarily fit the lower timing cover and the crankshaft pulley and check the alignment of the references.Fit the counter-balance shaft drive belt.

1. Tension the counter-balance shaft drive belt using the tool (1a) so that the reference opening (1b) in the belt tensioner is at the centre of the rotation sector.

	Name	Country
1a	Key	1.822.154.000

2. Tighten the nut for the counter-balance shaft drive belt moving tensioner to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Nut	COUNTER-ROTATING SHAFT BELT TENSIONER	M6	Left counter-balance. shaft front. cover side 1.0 - 1.3

- 1032D12 timing system protective cover(s) - r + r . - 1092G20 engine component single belt fixed tensioner - one - r + r . - 1092A12 crankshaft pulley - r+r for versions with air conditioner . - 1092G10 single engine belt r r - 7055B54 under-engine guard - r r . - 7055B39 front additional wheel arch half (one), lh or rh, front element - r r (right). - 4450B10 Front WHEEL (one) - R.R. (right). - 7040D14 engine bay rear side cover (one) lh or rh - r r (right). - 7040D12 engine front side cover (one) lh or rh - r r (right). Remove the vehicle from the ramp.