2710A10 DRIVE SHAFT WITH JOINTS (ONE), L/H OR R/H - R + R - Alfa - 166 - eLearn

3314533 - 2710A10 drive shaft with joints (one), l/h or r/h - r + r

) Position the vehicle on the ramp. - 4450B10 Front WHEEL (one) - R.R. . - 7055B39 front additional wheel arch half (one), lh or rh, front element - r r . - 7055B54 under-engine guard - r r . 1. Relieve the staking and undo the nut securing the drive shaft to the vertical link.2. Undo the drive shaft bolts.

The above bolts are treated with eslok anti-slackening material and must therefore be replaced whenever they are removed.

3. Remove the safety plates.

- 4410A80 damper lower fork - r r . Lift the vertical link using a hydraulic jack and attach it temporarily to the upper wishbone.1. Rotate the brake disc to the left and withdraw the drive shaft complete with couplings.

Refitting ( Removing

) Refit the drive shaft complete with couplings in its seating.Release the vertical link from the upper wishbone and lower it on the hydraulic jack. - 4410A80 damper lower fork - r r . 1. Fit the safety plates (1a) and tighten the drive shaft bolts (1b) to the specified torque.

The above bolts are treated with eslok anti-slackening material and must therefore be replaced whenever they are removed.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	FRONT DRIVE SHAFT COMPLETE WITH JOINTS	M8	(Differential intermediate drive shaft side 4/0 .) 4.4÷.