5040A26 COMPRESSOR MOUNT - R R - Alfa - 166 - eLearn

3314770 - 5040A26 compressor mount - r r

) Position the vehicle on the ramp. Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

- 7040D12 engine front side cover (one) lh or rh - r r (right). - 7040D14 engine bay rear side cover (one) lh or rh - r r (right). - 1092G10 single engine belt r r . - 5040A10 Air conditioning refrigerant CIRCUIT - Draining and Refilling . - 5040A44 air conditioner dehydrating filter/accumulator - r+r . - 5040A20 air conditioner compressor - r+r - includes fluid level check and top up if necessary . 1. Undo the bolts (1a) and remove the air conditioning compressor support (1b).

Refitting ( Removing

) Fit the air conditioning compressor support and fix it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	COMPRESSOR MOUNT (AC)	M10	Engine crankcase side 4.3 - 5.3

- 5040A20 air conditioner compressor - r+r - includes fluid level check and top up if necessary . - 5040A44 air conditioner dehydrating filter/accumulator - r+r . - 5040A10 Air conditioning refrigerant CIRCUIT - Draining and Refilling . - 1092G10 single engine belt r r . - 7040D14 engine bay rear side cover (one) lh or rh - r r (right). - 7040D12 engine front side cover (one) lh or rh - r r (right). Connect the negative (-) battery terminalRemove the car from the ramps.