1020D10 FRONT CRANK SHAFT OIL SEAL COVER - R + R AND REPLACE SEALS WITH TIMING BELT REMOVED (AUTOMATIC TRANSMISSION) - Alfa - 166 - eLearn

3314056 - 1020D10 front crank shaft oil seal cover - r + r and replace seals with timing belt removed (Automatic transmission)

) - 1020A20 crank case oil sump - r + r clean seals for sealant application . 1. Undo the alternator mounting bottom bolt.2. Remove the toothed drive pulley.3. Undo the bolts (3a) and remove the crankshaft front cover (3b) complete with oil seal.Remove the gasket.

Remove the oil seal from the crankshaft front cover.

Refitting ( Removing

) Fit the crankshaft front cover, complete with a new gasket, and fix it tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	CRANKSHAFT FRONT COVER	M6	Engine crankcase side 0.7 - 0.9

1. Fit a new oil seal (1a) using the tool (1b).

	Name	Country
1b	Fitting tool	1.860.949.000

Fit the toothed drive pulley.Fit the alternator mounting bottom bolt. - 1020A20 crank case oil sump - r + r clean seals for sealant application .