3314126 - 1056B82 injection/ignition system e.c.u. (one) - r + r (Automatic transmission)

Removing ( Refitting ) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

	Name	Connector
-	Battery	A1B

 - 1056B79  injection/ignition contro unit guard - r r . 1. Undo the bolts (1a), disconnect the wiring connections (1b), (1c), (1d), (1e), (1f) and (1g) and remove the fuel injection/ignition control unit (1h).

Follow the disconnection order: D - E - F - C - B - A.

	Name	Connector
1b	Engine management control unit	M10

	Name	Connector
1c	Engine management control unit	M10

	Name	Connector
1d	Engine management control unit	M10

	Name	Connector
1e	Engine management control unit	M10

	Name	Connector
1f	Engine management control unit	M10

	Name	Connector
1g	Engine management control unit	M10

Refitting ( Removing )

When refitting, the control unit learning procedure must be repeated (Carry out Op.   1056B81  run electronic ignition/injection control unit (single) self-learning procedure .

Place the fuel injection/ignition control unit back in its housing and fix it using the bolts.Connect the electrical connections to the fuel injection/ignition control unit.

Follow the connection order: A - B - C - D - E - F.

 - 1056B79  injection/ignition contro unit guard - r r . Connect the negative (-) battery terminal.