1036D14 CAMSHAFT IN CYLINDER HEAD - R R ON VEHICLE - Alfa - 166 - eLearn

3314232 - 1036D14 camshaft in cylinder head - r r on vehicle

) - 1016A30 left cam cover - r + r and replace gasket . - 7040D12 engine front side cover (one) lh or rh - r r (right). - 7040D14 engine bay rear side cover (one) lh or rh - r r (right). - 4450B10 Front WHEEL (one) - R.R. (right). - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. (right). - 4130B10 power steering fluid resevoir r r . 1. Undo the bolts (1a) and remove the upper protective timing cover (1b).2. Slacken the bolts securing the left cylinder head driven pulley.

1. Undo the nut (1a) securing the hub to the camshaft using the tools (1b) and (1c) as counter-torque.

	Name	Country
1b	Counter-torque	1.822.146.000

	Name	Country
1c	Counter-torque	1.870.716.000

Undo the bolts securing the left cylinder head driven pulley, slackened previously.1. Fit the tool on the driven pulley and fix it to the hub using the bolts

	Name	Country
1	Extractor	1.820.232.000

2. Tighten the nut on the tool (2a) using the tools (2b) and (2c) to lock the driven pulley, so that the pulley and hub can be brought forward until they disengage from the camshaft.

	Name	Country
2b	Counter-torque	1.822.146.000

	Name	Country
2c	Counter-torque	1.870.716.000

1. Undo the nuts (1a) and remove the camshaft caps (1b).2. Remove the left cylinder head camshaft.

Refitting ( Removing

) 1. Remove the central part of the tool.2. Fit the camshaft and check, through the hole in the tool, that the key is in the correct position.Push the driven pulley into its seat.Remove the tool.

	Name	Country
-	Extractor	1.820.232.000

1. Tighten the bolts securing the left cylinder head driven pulley to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1	Bolt	TIMING GEAR DRIVEN PULLEYS	-	Hub side -

2. Tighten the nut (2a) securing the hub to the camshaft to the specified torque, using the tools (2b) and (2c) as counter-torque.

	Fastening	Component	Ø	Value(daNm)
2a	Bolt	CAMSHAFT HUBS	M14	Camshaft side 9.5 - 11.7

	Name	Country
2b	Counter-torque	1.822.146.000

	Name	Country
2c	Counter-torque	1.870.716.000

3. Fit the camshaft caps (3a) and tighten their nuts (3b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
3b	Nut	CAMSHAFT SUPPORTS	M8	Cylinder head side 1.6 - 1.8

Fit the upper protective timing cover and fix it using the bolts. - 4130B10 power steering fluid resevoir r r . - 7055B42 Additional FRONT WHEEL ARCH (one), left or right - R.R. (right). - 4450B10 Front WHEEL (one) - R.R. (right). - 7040D14 engine bay rear side cover (one) lh or rh - r r (right). - 7040D12 engine front side cover (one) lh or rh - r r (right). - 1016A30 left cam cover - r + r and replace gasket .