3314253 - 1056B46 intake air temperature sensor - r + r

Removing ( Refitting ) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

	Name	Connector
-	Battery	A1B

1. Disconnect the electrical connection from the intake air temperature sensor.

	Name	Connector
1	Air temperature sensor	K42

2. Undo and remove the intake air temperature sensor. Refitting ( Removing ) Fit the intake air temperature sensor and tighten to the specified torque.

	Fastening	Component	Ø	Value(daNm)
-	-	METER AIR TEMPERATURE SENSOR	-	Rigid pipe side -

Connect the electrical connection to the intake air temperature sensor.Connect the negative (-) battery terminal.