1056B62 L/H AND R/H FUEL PIPE ASSEMBLY - WITH INJECTORS - R + R (AUTOMATIC TRANSMISSION) - Alfa - 166 - eLearn

3314254 - 1056B62 l/h and r/h fuel pipe assembly - with injectors - r + r (Automatic transmission)

) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op. 5530B10 battery - r+r ).

	Name	Connector
-	Battery	A1B

Discharge the fuel pressure (see GR 10 - WARNINGS).1. Disconnect the electrical connections from the injectors.

	Name	Connector
1	Injector	N70

- 1072B42 left hand or right hand inlet manifold (one) - r+r . 1. Disconnect the fuel supply pipe from the complete fuel pipe.2. Disconnect the fuel return pipe from the complete fuel pipe.3. Disconnect the vacuum intake pipe for the fuel pressure regulator.4. Undo the bolts (4a) and remove the fuel pipe (4b) complete with fuel injectors (3c).

Refitting ( Removing

) Fit the fuel pipe complete with fuel injectors and fix it using the bolts.

Check that the fuel injectors are positioned correctly in their seatings.

Connect the vacuum intake pipe for the fuel pressure regulator.Connect the fuel return pipe to the complete fuel pipe.Connect the fuel supply pipe to the complete fuel pipe. - 1072B42 left hand or right hand inlet manifold (one) - r+r . Connect the electrical connections to the injectors.Connect the negative (-) battery terminal.