3314264 - 1064A46 sleeve connecting lh exhaust manifold and turbocharger flange - r r and replace gaskets
Removing
(
Refitting
)
Place the vehicle on a ramp. - 7040D12 engine front side cover (one) lh or rh - r r
(right).
- 7040D14 engine bay rear side cover (one) lh or rh - r r
(right).
- 7055B54 under-engine guard - r r
.
- 1076B70 exhaust pipe between pre-catalytic converter and
catalytic converter - r r
.
- 1080B40 catalytic pre-converter - r r
.
1. Undo the nuts (1a) and remove the connecting hose between the
left exhaust manifold and turbocharger flange (1b).
Refitting
(
Removing
)
Fit the connecting hose between the left
exhaust manifold and turbocharger flange, and tighten the nuts to the
specified torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | - | 'UNO' MANIFOLD SLEEVE TO TURBO | - | Exhaust manifold side - |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | - | 'UNO' MANIFOLD SLEEVE TO TURBO | - | Turbocharger flange side - |