3314265 - 1064A48 sleeve connecting rh exhaust manifold and turbocharger flange - r r and replace gaskets
Removing
(
Refitting
)
Place the vehicle on a ramp. - 7055B54 under-engine guard - r r
.
- 1076B70 exhaust pipe between pre-catalytic converter and
catalytic converter - r r
.
1. Undo the nuts fixing the connecting hose between the right exhaust
manifold and turbocharger flange, turbocharger flange side.2. Undo the nuts (2a) and remove the connecting hose between the
right exhaust manifold and turbocharger flange (2b) complete with
gaskets.
Refitting
(
Removing
)
Fit the connecting hose between the right
exhaust manifold and turbocharger flange, complete with gaskets.Tighten the nuts fixing the connecting
hose between the right exhaust manifold and turbocharger flange, exhaust
manifold side, to the specified torque. | Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | - | 'UNO' MANIFOLD SLEEVE TO TURBO | - | Exhaust manifold side - |
| Fastening | Component | Ø | Value(daNm) |
|---|---|---|---|---|
| - | - | 'UNO' MANIFOLD SLEEVE TO TURBO | - | Turbocharger flange side - |