3314844 - 5510D10 spark plugs - r+r

Removing ( Refitting ) Make sure that the ignition is off (STOP position), then disconnect the negative battery terminal (refer to op.   5530B10  battery - r+r ).

NameConnector
-Battery  A1B 
 - 1016A30  left cam cover - r + r and replace gasket . Disconnect the spark plug high tension leads.
Use the tool to disconnect the high tension leads from the left cylinder head spark plugs.

NameCountry
-Pliers1.820.636.000
Blow through with compressed air in spark plug openings and remove any impurities or traces of dirt.With the engine cold, remove the spark plugs.Check the condition of the spark plugs and, when necessary, replace them.
Using different spark plugs from those recommended can cause damage to the engine and alter the exhaust emission levels.
Refitting ( Removing ) Fit the spark plugs and tighten them to the recommended torque.

FasteningComponentØValue(daNm)
--SPARK PLUGSM14Cylinder head side 2.1 - 2.6
Connect the high tension leads to the spark plugs. - 1016A30  left cam cover - r + r and replace gasket . Connect the negative (-) battery terminal.